A Class l trailer hitch ball mount typically uses a hitch ball with a 3/4 inch shank.
If that is the case for your ball mount then I recommend a hitch ball like part # C40018. view full answer...
It sounds like you want a trailer hitch with a ball mount and hitch ball that can be removed. There are trailer hitches available for your 2011 Cadillac CTS Sedan that will allow you to use a 2 inch ball on a removable ball mount. The trailer hitch that I would recommend for you is the Draw-Tite Class I Trailer Hitch, # 24767. You would only need to add the ball mount and hitch ball. For a 2 inch hitch ball, use part # 19258. If you want a 1-7/8 inch hitch ball, use part # 19256.
Keep... view full answer...
To tow a trailer with your 2011 Jeep Grand Cherokee you will also need a ball mount, hitch pin and clip, hitch ball, and wiring harness. Based on my research, the Draw-Tite Trailer Hitch on your Grand Cherokee is a 2 inch Class III trailer hitch, # 75699.
To provide you with a great starter kit for towing, I recommend the etrailer.com Ball Mount Kit for 2 Inch Hitches # 989900. This kit includes 2 ball mounts (one with a 3/4 inch rise or 2 inch drop and the other with a 2-3/4 inch rise... view full answer...
The hitch ball that you need depends on what size hitch ball the coupler requires on the trailer that you are towing. The coupler on a trailer requires a specific size hitch ball, however some couplers are adjustable for different ball sizes. There should be a stamp somewhere on the coupler of your trailer saying what size ball is required.
If you will be carrying hitch mounted accessories such as a bike rack or cargo carrier with this trailer hitch, then you will need a stabilization... view full answer...
Since the trailer you purchased has a coupler that requires a 2" hitch ball, you will need to either replace the 2-5/16" hitch ball on your current ball mount or purchase a separate ball mount with a 2" hitch ball when you need to tow that specific trailer.
If you are wanting to replace the hitch ball on your current ball mount you will need to measure the diameter of the hitch ball hole. Since it currently has a 2-5/16" hitch ball it more than likely has a 1-1/4" hole. For a 2" hitch... view full answer...
To determine what size hitch ball you will need to pull your custom flat bed trailer, you will just need to look at the coupler on the trailer. Typically, the size hitch ball needed will be stamped into the coupler's metal housing or listed on a safety sticker.
Once you find the hitch ball size you need, you will also need to check the ball shank diameter to ensure that it will fit the ball hole on your ball mount. Lastly, you will just choose a hitch ball that has at least a 6,000 pound... view full answer...
There is not a required ball mount for this Draw-Tite Trailer Hitch Receiver, part # 75673. Since you are worried about clearance I would recommend you use a Trailer Hitch Ball Mount, part # D-4. This ball mount has a distance of 10-1/4 inches from the center of the hitch pin hole to the ball hole. You would have plenty of clearance to run this ball mount in the rise position.
I attached installation instructions below as well as a review video of this hitch for you to check out. view full answer...
If your Explorer has a Class lll trailer hitch already installed I recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure... view full answer...
In order to pull a trailer with your 2004 Chrysler Pacifica, you will need a trailer hitch, a ball mount, ball, pin and clip, and trailer wiring. For a trailer hitch, you can use the Draw-Tite hitch, # 75522, that you have referenced. I have included a link to the installation instructions and a link to a video showing a typical installation for you.
For a ball mount, ball, and pin and clip, I recommend the etrailer ball mount kit, # 989900. This kit comes with 2 ball mounts, a 2 inch... view full answer...
You will need a ball that matches your trailer coupler. The required ball size should be stamped into the top of the coupler.
For a 1-7/8 inch ball you will want hitch ball # 19260. For a 2 inch ball you will want # 63849. For a 2-5/16 inch ball you will want # C40007.
I have included a FAQ article on choosing hitch balls for you to check out. view full answer...
When you are towing a trailer you want the trailer to be as level as possible behind your F-150. I have attached a helpful article that explains how you can measure to find the best ball mount.
You just need a tape measure to do this. Park the truck on level ground and then measure form the ground to the top of the receiver opening. Then measure the distance from the bottom of the trailer coupler to the ground. If the hitch height is greater you will need a ball mount with a drop. If... view full answer...
In order to use the hitch ball part # 63912 in the ball mount part # D-4 you will need to use a hitch ball bushing part # C21100 since the shank of the hitch ball is 3/4 inch in diameter and the hole of the ball mount is 1 inch.
The ball mount will fit the hitch part # 13333 as-is though. For a hitch pin you would want part # PC3 or for a locking hitch pin # e98880. view full answer...
You will need to get a 2-5/16" trailer ball for the 2-5/16" coupler on the other trailer. You can replace the ball on your current ball mount or get a new ball mount with the ball. Here are some options listed below.
2-5/16" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs # C40005
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 15,000 lbs # C40030
Buyers Products Tri-Ball Hitch # 3371802202
etrailer Ball Mount Kit # EBMK2216 view full answer...
The Draw-Tite trailer hitch, # 36297, that you have referenced is a Class II trailer hitch. with a Class II trailer hitch, you will need to use the manufacturer recommended ball mount. According to the installation details linked below, the required ball mount is # 36061, and it should be used in the rise position only. It has a 3-1/8 inch rise and measures 9-3/4 inches from the center of the hitch pin hole to the center of the ball hole.
This ball mount is rated at 3,500 pound gross... view full answer...
To go with Curt trailer hitch # 14250 I recommend etrailer ball mount kit # EBMK2216. It includes a ball mount, a 2 inch ball, a 2-5/16 inch ball (which is probably what you meant since there are no 2-5/8 inch balls), a hitch pin with clip, and a storage bag.
You will also need to add a trailer wiring harness to your Sprinter if it does not already have one. You can use # C59236. I have included links to the installation instructions for the hitch and wiring for you. view full answer...
For your 2005 Dodge Dakota Quad Cab V8, I recommend the Draw-Tite Aluminum Ball Mount # 4283 based on the coupler height you gave. It is a Class III ball mount with a 7 inch rise with a tow rating of 12,000 lbs. This mount will be a good fit based on your coupler height with the hitch height of the Hidden Hitch and Draw-Tite trailer hitches you referenced as it will provide a level tow for your boat trailer.
If you would prefer a more economic option, I would recommend the Draw-Tite 6-3/4... view full answer...
The Draw-Tite trailer hitch # 36336 and wiring harness # C55358 are correct for your 1999 Toyota Camry. The ball mount # 36061 is correct for the hitch as well.
There is a way to determine the right ball mount height to tow a trailer level but it is moot because you can't use a different ball mount other than what the hitch manufacturer specifies. But nevertheless I have included a link to the right that explains how to measure to choose the right ball mount should you need it for any... view full answer...
Yes, the 75673 hitch will carry over and fit the 2011 model Outback. We also have the Curt Trailer Hitch, # 13390. This is a Class III trailer hitch rated at 3,500 pounds of gross trailer weight and 350 pounds tongue weight capacity, and it has a 2 inch receiver.
I have included a link to the installation details below for the hitches. If you plan on doing some towing with the hitch, I recommend the etrailer.com Ball Mount Kit, # 989900. This kit comes with two ball mounts, two balls,... view full answer...
In order to obtain a 2" hitch ball for the Trailer Valet RVR3 Remote-Controlled Trailer Dolly part # TVRVR3-BB225 which comes with a 2-5/16" hitch ball you simply need the Replacement 2" Hitch Ball for Trailer Valet part # TVHB2. There isn't a way to order it with just the 2 inch hitch ball. view full answer...
You'll need a few things to tow a small trailer with your 2018 Subaru Impreza including a hitch like you mentioned. You'll also need wiring to operate the trailer lights, a ball mount to hold the hitch ball that the trailer connects to and a hitch ball that the coupler of the trailer attaches to. For a hitch I recommend the Draw Tite hitch part # 76209, which is a custom fit for your vehicle, because it has a 2 inch hitch opening which means it has great towing capacities and because it... view full answer...
Go To Results